Vacuum Membrane Press without Heating System
CVPM is a basic economical model of vacuum membrane press, without heating system, intended for veneering, laminating, bending, and vacuum forming.

CVPM is a basic economical model of vacuum membrane press, without heating system, intended for veneering, laminating, bending, and vacuum forming.
CVPM
Intended for bending, veneering and laminating curves and flat surfaces with the desired wood materials. The CVPM machine can also be used for thermoforming thermoplastics and solid surface materials such as Corian, Plexiglass, mineral composites, and similar materials. If the material is previously preheated, the CVPM machine enables precise and efficient thermoforming.

TECHNICAL FEATURES
- Useful area 1300x2900 mm
- Bakelite plates, grooved for fast air extraction
- Membrane - 2.5mm Natural Elastomer (NR)
- Opening: manual*
VACUUM SYSTEM
- Final pressure -997,0/-998,5 mbar
- Inlet Capacity 25m3/h
- Oil lubricated vacuum pump
- Pump is protected with inlet dust filter and condense separator
- Digital Vacuum switch for automatic stop
POWER
- Power: 0,75 kW
*Technical characteristics reserved to change without notice
*OPTIONAL UPGRADES: *Silicone membrane*, Pneumatic Opening
Mainly used for Veneering, Laminating and Forming.
With CVPM machine in combination with an heating oven or WISCHT STF-Subli machine , you can make high quality thermoforming process. Thermoforming is a manufacturing process where a plastic sheet is heated to a pliable forming temperature, formed to a specific shape in a mold, and trimmed to create a usable product. The sheet, or "film" when referring to thinner gauges and certain material types, is heated in an oven to a high-enough temperature that permits it to be stretched into or onto a mold and cooled to a finished shape.
